Chukhlіb Vitalii Leonidovych, Head of Department, Doctor of Engineering Sciences, Professor
Gubskyi Serhii Oleksandrovych, Intercessor of the head of the department , Candidate of Engineering Sciences, Associate Professor
Ashkelianets Anton Volodymyrovych, Associate Professor of Department, Candidate of Engineering Sciences
Okun Anton Oleksandrovych, Associate Professor of Department, Candidate of Engineering Sciences
Yurchenko Oleksandr Anatoliiovych, Associate Professor of Department, Candidate of Engineering Sciences
Kravtsova Iryna Oleksiivna, senior teacher of the department
Tkachev Vyacheslav Yuriyovych, senior teacher of the department
Postgraduate students
Duvansky Oleksandr Mykolaiovych, a postgraduate student of Department
Palienko Volodymyr Oleksiiovych, a postgraduate student of Department
Kolisnyk Kostyantyn Dmytrovych, a postgraduate student of Department
Educational Support Staff
Bosyi Viktor Pavlovych, Head of laboratory;
Domanova Yevheniya Volodymyrivna, 1st category engineer;
Konev Anatolii Ivanovych, Master of manufacture training;
Kutetskyi Yaroslav Valentynovych, Software engineer.
Chukhlib Vitalii Leonidovych, Head of Department, Doctor of Engineering Sciences, Professor.
He was born in 1975 in the city of Dnipropetrovsk. After graduating from the mathematics class of 96 Dnipropetrovsk secondary school in 1992, he entered the Dnipropetrovsk Metallurgical Institute (DMetI) at the Metal Forming Department named after Academician O.P. Chekmarev. During his study he was elected a scholarship holder of the Scholarship named after Academician O.P. Chekmarev (1995) and a Scholarship of the Academic Council of the Academy (1996), and was also chosen the best in the speciality “Best Blacksmith” (1995).
After graduation with honors in 1997 of the State Metallurgical Academy of Ukraine (since 1994 it became known as DMetI) entered postgraduate course at the Metal Forming Department named after Academician O.P. Chekmarev. After graduation from postgraduate course in 2000, he was hired by the National Metallurgical Academy of Ukraine (since 1999 it became known as the State Metallurgical Academy of Ukraine) as an assistant at the Metal Forming Department named after Academician O.P. Chekmarev.
In 2002 he defended his thesis on “Development and implementation of resource-saving technology for the manufacture of rolling rings with the final forging piercing” in the speciality “Processes and machines for metal forming”. In the same year he was awarded the degree of Candidate of Engineering Sciences and was transferred to the position of associate professor of Metal forming Department named after Academician O.P. Chekmarev of the National Metallurgical Academy of Ukraine (NMetAU).
During 2004-2005 he was the Deputy Dean of the Faculty of Materials Science and Metal Forming of NMetAU. Also during 2001-2006 he was the chairman of the Council of Young Scientists of the Faculty of Materials Science and Metal Forming of NMetAU. In 2005 he received the academic title of associate professor of the Metal Forming Department and was elected a scholarship holder of the Cabinet of Ministers of Ukraine Scholarship for Young Scientists. In 2013-2018 he is the head of the section of monitoring the education quality of the Council for Ensuring the Quality of Educational Activities of NMetAU. During 2006-2007 he was the head of the Department of Metal Forming by the State Institute of Training and Retraining of Industrial Personnel (Dnipropetrovsk).
In 2014 he received a Diploma of the Chairman of the District Administration of Dnipropetrovsk, and in 2017 he received a Diploma of the Chairman of the Dnipropetrovsk Regional Council.
In 2017, he defended his doctoral thesis on “Development of scientific bases with a rational combination of upsetting and broaching of products of predictable quality from steels and titanium alloys” in the speciality “Processes and machines for metal forming”. In the same year he was awarded the degree of Doctor of Engineering Sciences and was transferred to the Professor position of the Metal Forming Department named after Academician O.P. Chekmarev of NMetAU.
In 2018 he became the head of the Department of Computer Modeling and Integrated Forming Technologies of National Technical University “Kharkiv Polytechnic Institute”, as well as a member of the Academic Council of the Institute of Mechanical Engineering and Transport of the National Technical University “Kharkiv Polytechnic Institute” and a member of the Academic Council of the National Technical University “Kharkiv Polytechnic Institute”. Since 2018, he has been a member of the Specialized Academic Council Д45.052.06 at the Kremenchug National University named after M. Ostrogradskyi, and since 2022 he is a member of the Specialized Academic Council Д64.050.12 at the National Technical University “Kharkiv Polytechnic Institute”.
The basis of Chukhlib’s scientific interests is the theory and technology of forging and forming production, specifically the definition of a set of rational parameters of the forging process with a combination of upsetting and broaching operations and variation of the deformation direction by theoretical and experimental study of metal deformation with initial non-uniformity of properties which makes it possible to obtain products from carbon steels, special and titanium alloys with the desired properties and savings in material costs. For the conditions of PJSC “Electrometallurgical Plant” Dniprospetsstal”, PJSC” Odessa Machine-Building Plant”, PJSC” NGO DNIPROPRESS” and LLC “DNIPROPRESS STEEL”, as well as PJSC “Novokramatorsk Machine-Building Plant” Chukhlib V.L. developed rational temperature and deformation modes of forging of carbon steels, special and titanium alloys, and when forging forging pieces and its influence on the geometric parameters of forging pieces depending on the shape of the workpiece and process factors with reduced forging coefficients to improve the mechanical properties of products. Technological processes of forging were designed at these enterprises, which allowed to reduce by 20-25% the rejection of metal during forging and reduce by 30-35% the cost of peeling forgings and improve the quality of the obtained forging pieces.
During 2005-2008 Chukhlib V.L. was a scientific consultant of PJSC “Dniprotyazhmash”, and in 2013-2015 he was a scientific consultant of PJSC “NGO Dnipropress” and during 2015-2020 he was a scientific consultant for blacksmith production of OJSC “DNIPROPRESS STEEL”.
During the pedagogical activity Chukhlib V.L. taught and teaches the following lecture courses: “Theory of plastic flow of solids”, “Theory of metal forming”, “Theory of forging and forming production”, “Technology of forging and forming production”, “Resource saving in the processing of metal forming”, “Defects and quality control of metal products”, “Processing of metal forming”, “Fundamentals of technical creativity “, etc. As of 2023 Chukhlib V.L. is the author of more than 110 scientific and methodical works published in domestic and foreign scientific editions, as well as 1 textbook stamped by the Ministry of Education and Science of Ukraine and 4 patents.
Areas of scientific work
- Computer modeling and experimental study of the forging process with the initial non-uniformity of properties.
Disciplines
- Introduction to the speciality.
- Theory of metal forming.
- Forging production technology.
- Defects and quality control of metal products.
List of published articles (download) Home
Gubskyi Serhii Oleksandrovych, Intercessor of the head of the department of KMIT, Candidate of Engineering Sciences, Associate Professor
He was born in 1983 in Valky, Kharkiv region. In 2006 he graduated with honors from the National Technical University “Kharkiv Polytechnic Institute” and received the qualification of mechanical engineer-researcher.
In 2013 he defended his thesis. In 2015 he was awarded the academic title of associate professor.
During 2009-2018 he worked at the Lifting and Transporting Machines and Equipment Department as an assistant, senior lecturer, associate professor. Since 2018 he has been working as an associate professor at the Department of Computer Modeling and Integrated Forming Technologies of the National Technical University “Kharkiv Polytechnic Institute”.
During 2018-2021 he has been the Deputy Director of the Educational and Scientific Institute of Mechanical Engineering and Transport of the National Technical University “Kharkiv Polytechnic Institute”.
Since 2018 he has been the Scientific Secretary of the Department of Computer Modeling and Integrated Forming Technologies of the National Technical University “Kharkiv Polytechnic Institute”.
He has practical experience: design engineer at PTM PJSC “PKTI” Ukrkranenergo” (Kharkiv), head of the laboratory of examination and technical diagnostics at LLC “Pidomservice” (Kharkiv).
He has published more than 50 scientific papers. He is an author of 3 inventions.
Areas of scientific work
- Computer modeling and development of optimal modes of deformation of bent profiles.
- Research, development and implementation of technological processes for the production of bent profiles.
- Development of an intelligent control system for robot manipulators.
- Automation of production and operational processes.
- Forecasting the life of crane metal structures.
Disciplines
- Fundamentals of information technology.
- Fundamentals of modeling of pressure treatment processes.
- Technologies and equipment for the production of bent profiles.
- Research of technology of production of bent profiles.
- Modeling and design of processes, products, equipment.
- Automation and robotics of equipment.
- Robots and computer-integrated systems.
List of published articles (download) Home
Ashkelianets Anton Volodymyrovych, Associate Professor of Department, Candidate of Engineering Sciences, Associate Professor
He was born in 1985 in Dnipropetrovsk. In 2007 he graduated from the National Metallurgical Academy of Ukraine (NMetAU) and received a master’s degree in “Metal forming”. In 2007 he entered the postgraduate course of the Metal Forming Department named after Academician O.P. Chekmarev of NMetAU.
In 2010 he defended his thesis on “Development of the basics of resource-saving technological modes of forging discs with ledges using a circular conical tool” in the speciality 05.03.05 “Processes and machines of forming”. In 2014 he was awarded the academic title of associate professor.
In the period 2010-2020 he was the Deputy Executive Secretary of the Admissions Committee of NMetAU. In 2019-2020 he was Chairman of the Career Development Center of NMetAU.
In 2007-2020 he worked at the Metal Forming Department named after Academician O.P. Chekmarev NMetAU (Dnipro). Since 2020, Ashkelyanets A.V. has been working as an associate professor at the Department of Computer Modeling and Integrated Forming Technologies of the Educational and Scientific Institute of Mechanical Engineering and Transport of the National Technical University “Kharkiv Polytechnic Institute”.
He has published more than 60 scientific papers. He is an author of 5 inventions.
Areas of scientific work
- Computer modeling and development of optimal modes of deformation of all-rolled railway wheels.
- Resource-saving technological modes of forging discs with ledges.
- Development and research of sheet metal forming technology.
- Development of computer models using the finite element method.
Disciplines
- Methods of computational mathematics in forming
- Forging and forming equipment
- Research of forging and sheet forming technology
List of published articles (download) Home
Okun Anton Oleksandrovych, Associate Professor, Candidate of Engineering Sciences, Associate Professor
He was born in 1985 in Kharkiv. In 2007 he graduated with honors from Kharkiv National University named after V.N. Karazin and received engineer qualification.
In 2007–2008 he was a hydrogeologist-technician of the UkrNDI of environmental problems (Kharkiv), and in 2008–2009 he was a researcher at the UDNDI UkrVODGEO (Kharkiv). In 2009 he transferred to the National Technical University “Kharkiv Polytechnic Institute” to the Lifting and Transporting Machines and Equipment Department, where he worked as an assistant and a senior lecturer.
In 2018 he defended his thesis on “Improving the control of the crane trolley movement with the factor of positioning and time cycle”.
Since 2019, Okun A.O. has been working as an associate professor at the Department of Computer Modeling and Integrated Forming Technologies of the Educational and Scientific Institute of Mechanical Engineering and Transport of the National Technical University “Kharkiv Polytechnic Institute”.
In 2020, he received the academic title of associate professor.
Areas of scientific work
- Research and development of technological processes of bulk forming.
- Patent science.
Disciplines
- Automats, automatic lines and complexes in Metal Forming.
- Fundamentals of CAD.
- Automatic presses and automatic lines for Metal Forming.
List of published articles (download) Home
Yurchenko Oleksandr Anatoliiovych, Associate Professor of Department, Candidate of Engineering Sciences, Senior Research Associate, Associate Professor
He was born in 1969 in Kharkiv. He graduated from Kharkiv Polytechnic University in 1994.
In 1994 he worked as a junior researcher at the Ukrainian State Research Institute of Metals (Kharkiv).
In 1995-1997 he studied at the graduate course of Kharkiv Polytechnic University.
Since 1998 he has been teaching at the Department of Computer Modeling and Integrated Forming Technologies of the National Technical University “Kharkiv Polytechnic Institute”.
In 2000 he defended his thesis on “Development, research and implementation of technology for roll forming of bent profiles with cutting elements”.
In 2003 he was awarded the academic title of senior research associate. In 2010 he was awarded the academic title of associate professor.
He has published 30 articles on the technology of roll forming of profiles with cutting elements. He is an author of two inventions.
Areas of scientific work
- Development and research of sheet metal forming technology.
Disciplines
- Sheet metal forming technology.
- Principles of die design.
- Electrical equipment, automation and microprocessor technology.
List of published articles (download) Home
Academics who worked at the department in different years >>>
Kravtsova Iryna Oleksiivna, senior teacher of the department of KMIT
Areas of scientific work
Disciplines
List of published articles (download) Home
Tkachev Vyacheslav Yuriyovych, senior teacher of the department of KMIT.
Areas of scientific work
Disciplines
List of published articles (download) Home
Аспіранти
Postgraduate students
Duvansky Oleksander Mykolaiovych, a postgraduate student of Department.
He was born in 1997 in Oleksiyivka, Bilokurakyn district, Luhansk region. In 2014 he entered the National Technical University “Kharkiv Polytechnic Institute”. In 2020 he received a master’s degree in “Applied Mechanics” and entered postgraduate course at the Department of Computer Modeling and Integrated Forming Technologies. Supervisor of the thesis is Chukhlib V.L. the Head of Department.
List of published articles (download) Home
Palienko Volodymyr Oleksiiovych, a postgraduate student of Department.
He was born in 1996 in Svitlovodsk, Kirovohrad region. He graduated from Svitlovodsk Polytechnic College in 2015 and entered the National Technical University “Kharkiv Polytechnic Institute”. In 2019 he received a master’s degree in “Applied Mechanics”. In 2020 he entered postgraduate course at the Department of Computer Modeling and Integrated Forming Technology. Supervisor of the thesis is Chukhlib V.L. the Head of Department.
List of published articles (download) Home
Kolisnyk Kostyantyn Dmytrovych, a postgraduate student of Department
List of published articles (download) Home
Bosyi Viktor Pavlovych, Head of laboratory
Domanova Yevheniya Volodymyrivna, 1st category engineer
Konev Anatolii Ivanovych, Master of manufacture training
Kutetskyi Yaroslav Valentynovych, Software engineer