Olga Ponomarenko


Position: Head of Department

Degree: Doctor of Technical Sciences

Title: Professor

Contact details: olha.ponomarenko@khpi.edu.ua, Academic Building U1, Room 1303

Head of the research area

“Improving the reliability of complex systems, optimizing technological solutions in the design, operation, and reconstruction of workshops, and developing new technical solutions in the field of technology and equipment based on them, as well as the technology for creating and developing the latest binders for molds and rods for cold-hardening technologies.”

Professional and academic experience

Main stages of teaching activity in higher education institutions of III-IV accreditation levels:

1990–1991 – Assistant at the Department of Foundry Production, Kharkiv Polytechnic Institute;
1991–1992 – Senior Lecturer, Department of Foundry Production, Kharkiv Polytechnic Institute;
1992–1998 – Associate Professor, Department of Foundry Production, Kharkiv State Polytechnic University;
1999–2024 – Professor at the Department of Foundry Production at the National Technical University “Kharkiv Polytechnic Institute” (NTU “KPI”);
since 02.09.2024 – Head of the Department of Foundry Production at NTU “KPI”.

Education

Graduated with honors from Kharkiv Polytechnic Institute in 1977 with a degree in “Machines and Technology of Foundry Production,” qualification – mechanical engineer, diploma B-1 No. 583190, 02.26.1977
Candidate of Technical Sciences since 1988. 05.16.04 – Foundry Production (136 Metallurgy). Diploma TN No. 111801, 22.04.1988.
Doctor of Technical Sciences since 1999, 16.04 – Foundry Production (136 Metallurgy). Defended her dissertation on October 14, 1998 at the specialized academic council of the Physical-Technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine. Doctor of Science diploma DD No. 000494, 10.02.1999.
The academic title of Associate Professor of the Department of Foundry Production was awarded in 1993, certificate DC No. 004540 dated 25.03.1993, issued by the Ministry of Education and Science of Ukraine, Ukraine.
The academic title of Professor of the Department of Foundry Production was awarded in 2001, certificate PR No. 001048, 21.12.2001, Decision of the Attestation Board of December 21, 2001, issued by the Ministry of Education and Science of Ukraine, Ukraine.

Teaching disciplines
“Theory of Casting Formation”;
“Analysis and Synthesis of Casting Systems”;
“Molding Materials and Mixtures”;
“Physical and Chemical Fundamentals of Casting Production”;
“Resource-Saving Technologies and Melting of Alloys with Special Properties”;
“Design of Cast Products and Equipment”;
“Additive technologies in foundry production”

Research interests

Optimization of technological solutions in the design, operation, and reconstruction of foundries.

Professional achievements and membership
Published over 400 scientific and educational works, 8 methodological manuals approved by the Ministry of Education of Ukraine, 1 textbook, 3 monographs, and 17 author's certificates and patents.
Scientific consultant for 1 dissertation for the degree of Doctor of Technical Sciences;
Scientific supervisor of 2 dissertations for the degree of Candidate of Technical Sciences
Guarantor in the specialty G10 “Metallurgy” of the educational and professional master's program “Metallurgical Processes and Systems” in the specialty 136 Metallurgy (Order 104 OD NTU “KhPI” dated March 26, 2024);
Member of the Specialized Academic Council for the Defense of Doctoral Dissertations of the National Metallurgical Academy of Ukraine D8.084.02, Dnipro, from 2002 to December 31, 2021, and since January 1, 2022, member of the Specialized Academic Council for the Defense of Doctoral Dissertations D8.084. 02 of the Ukrainian State University of Science and Technology (UDUNT).
Academician of Sciences of Higher Education of Ukraine since 2010.
Vice-President of the Association of Foundrymen of Ukraine since 2009.

Published works. Textbooks, teaching aids, monographs
Metallurgy of Rare Metals: Textbook / I.F. Chervony, I.V. Pitak, O.I. Ponomarenko, et al. – Kharkiv: Madrid Printing House, 2019. – 162 p.
Mogilatenko V.G. Theoretical foundations of foundry production / V.G. Mogilatenko, O.I. Ponomarenko, V.M. Drobiazko, A.S. Kochevshkov, M.M. Yamshinsky. – Kharkiv: NTU “KhPI”, 2011. – 260 p.
Theoretical Foundations of Casting Formation [text]: textbook / T.V. Lysenko, O.I. Ponomarenko, V.P. Dotsenko [et al.]. Kharkiv: NTU “KhPI”, 2014. – 180 p.
Ponomarenko O.I. Automated design of molding and core machines [text]: textbook / O.I. Ponomarenko, I.I. Gunko, S.V. Porokhnya, N.S. Yevtushenko. - Kharkiv: NTU “KhPI”, 2014. - 256 p.

Articles

  1. Grimzin I., Ponomarenko O., Marynenko D., Yevtushenko N., Berlizeva T. (2020) The Technological Process of Obtaining Sand-Plaster Molds for Complex Thin-Walled Aluminum Castings. In: Tonkonogyi V. et al. (eds) Advanced Manufacturing Processes. InterPartner 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. ISSN 2195-4356. DOI: https://doi.org/10.1007/978-3-030-40724-7_41
  2. Ponomarenko O., Berlizeva T., Grimzin I., Yevtushenko N., Lysenko T. (2020) Strength Properties Control of Mixtures Based on Soluble Glass with Ethereos Solidifiers. In: Ivanov V., Trojanowska J., Pavlenko I., Zajac J., Peraković D. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. ISSN 2195-4356. DOI: https://doi.org/10.1007/978-3-030-50794-7_50
  3. Berlizeva T., Ponomarenko O., Yevtushenko N., Grimzin I., Lysenko T.  (2022) Control of the Strength Properties of Mixtures Based on Chromite Sand. In: V. Tonkonogyi et al. (Eds.): InterPartner 2021, LNME, 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. ISSN 2195-4356. DOI: https://doi.org/10.1007/978-3-030-91327-4_24
  4. Ponomarenko O. Advanced Technologies of Manufacturing Readily Removable Cores for Obtaining High-Quality Castings  / O. Ponomarenko , I. Grimzin , N. Yevtushenko , T. Lysenko, D.Marynenko // Advances in Design, Simulation and Manufacturing IV Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 1: Manufacturing and Materials Engineering. Pages 565-574/ Lecture Notes in Mechanical Engineering.  Springer, Cham. – 2021. –. Pages 565-574.  DOI: 10.1007/978-3-030-77719-7_56
  5. Olga Ponomarenko, Nataliia Yevtushenko, Tetiana Berlizieva, Igor Grimzin, Tatiana Lysenko. A Method for Calculating the Strength Performance of Cast Parts. In: Tonkonogyi V., Ivanov V., Trojanowska J., Oborskyi G., Pavlenko I. (eds) Advanced Manufacturing Processes IV. InterPartner 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. September 6-9, 2022 | Odessa, Ukraine. С. 473-481. ISSN 2195-4356. DOI: https://doi.org/10.1007/978-3-031-16651-8_45